default

Use default to restore the default settings for a loopback or null interface.

Syntax

default

Views

Loopback interface view, null interface view

Predefined user roles

network-admin

Usage guidelines

	CAUTION: The default command might interrupt ongoing network services. Make sure you are fully aware of the impacts of this command before using it on a live network.

This command might fail to restore the default settings for some commands for reasons such as command dependencies and system restrictions. Use the display this command in interface view to identify these commands, and then use their undo forms or follow the command reference to restore their default settings. If your restoration attempt still fails, follow the error message instructions to resolve the problem.

Examples

# Restore the default settings for interface loopback 1.

<Sysname> system-view
[Sysname] interface loopback 1
[Sysname-LoopBack1] default