storm-constrain enable trap

Use storm-constrain enable trap to enable an Ethernet interface to send storm control threshold event traps.

Use undo storm-constrain enable trap to disable trap sending.

Syntax

storm-constrain enable trap

undo storm-constrain enable trap

Default

An interface sends out traps when monitored traffic exceeds the upper threshold or falls below the lower threshold.

Views

Layer 2 Ethernet interface view

Predefined user roles

network-admin

Examples

# Enable Ten-GigabitEthernet 1/0/1 to send traps when it detects storm control threshold events.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] storm-constrain enable trap