port connection-distance

Use port connection-distance to set the interface connection distance.

Use undo port connection-distance to restore the default.

Syntax

port connection-distance { 300 | 10000 | 20000 | 40000 }

undo port connection-distance

Default

The interface connection distance is 10000 meters.

Views

Layer 2 Ethernet interface view

Predefined user roles

network-admin

Parameters

300: Sets the interface connection distance to 300 meters.

10000: Sets the interface connection distance to 10000 meters.

20000: Sets the interface connection distance to 20000 meters.

40000: Sets the interface connection distance to 40000 meters.

Usage guidelines

When two directly connected interfaces communicate, they use the buffer area to buffer the received data. A longer interface connection distance requires a greater buffer area.

Perform this task to modify the buffer area size by setting the interface connection distance.

Configure this command based on the network conditions because the buffer area size is limited.

Examples

# Set the interface connection distance to 20000 meters.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port connection-distance 20000