shutdown
Use shutdown to shut down an Ethernet interface.
Use undo shutdown to bring up an Ethernet interface.
Syntax
shutdown
undo shutdown
Default
Ethernet interfaces are in up state.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
You might need to shut down and then bring up an Ethernet interface to make some interface configurations take effect.
Examples
# Shut down and then bring up Ten-GigabitEthernet 1/0/1.
<Sysname> system-view [Sysname] interface ten-gigabitethernet 1/0/1 [Sysname-Ten-GigabitEthernet1/0/1] shutdown [Sysname-Ten-GigabitEthernet1/0/1] undo shutdown