Enabling an OpenFlow instance to perform QinQ tagging for double-tagged packets passing an extensibility flow table

By default, a double-tagged packet becomes single-tagged after it passes an extensibility flow table. Perform this task to allow double-tagged packets to keep double-tagged after the packets pass an extensibility flow table.

To enable an OpenFlow instance to perform QinQ tagging for double-tagged packets passing an extensibility flow table:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter OpenFlow instance view.

openflow instance instance-id

N/A

3. Enable the OpenFlow instance to perform QinQ tagging for double-tagged packets passing an extensibility flow table.

qinq-network enable

By default, a double-tagged packet becomes single-tagged after it passes an extensibility flow table.