combo enable (only applicable to HPE 5510 24G SFP 4SFP+ HI 1-slot Switch (JH149A) switches)

Use combo enable to activate the copper or fiber combo port of a combo interface.

Syntax

combo enable { copper | fiber }

Default

The copper combo port of a combo interface is activated.

Views

Ethernet interface view

Predefined user roles

network-admin

Parameters

copper: Activates the copper combo port. In this case, use twisted pairs to connect the port.

fiber: Activates the fiber combo port. In this case, use optical fibers to connect the port.

Usage guidelines

A combo interface is a logical interface that physically contains one fiber combo port and one copper combo port on the device panel. The two ports share one forwarding interface. As a result, they cannot work simultaneously. When you activate either port, the other port is automatically disabled. You can select to activate the copper combo port or fiber combo port.

For more information about the number of combo interfaces, see the installation guide.

Examples

# Activate the copper combo port of combo interface GigabitEthernet 1/0/1.

<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] combo enable copper

# Activate the fiber combo port of combo interface GigabitEthernet 1/0/1.

<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] combo enable fiber