irf-port

Use irf-port to enter IRF port view.

Use undo irf-port to remove all port bindings on an IRF port.

Syntax

irf-port member-id/port-number

undo irf-port member-id/port-number

Views

System view

Predefined user roles

network-admin

Parameters

member-id/port-number: Specifies an IRF port on an IRF member. The member-id argument represents the ID of the IRF member. The port-number argument represents the IRF port index and must be 1 or 2.

Usage guidelines

To bind physical interfaces to an IRF port, you must enter IRF port view.

Before you remove all port bindings on an IRF port, shut down all its physical interfaces.

Examples

# Bind Ten-GigabitEthernet 3/0/49 to IRF-port 3/1.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 3/0/49
[Sysname-Ten-GigabitEthernet3/0/49] shutdown
[Sysname-Ten-GigabitEthernet3/0/49] quit
[Sysname] irf-port 3/1
[Sysname-irf-port3/1] port group interface ten-gigabitethernet 3/0/49
[Sysname-irf-port3/1] quit
[Sysname] interface ten-gigabitethernet 3/0/49
[Sysname-Ten-GigabitEthernet3/0/49] undo shutdown

Related commands

port group interface