default

Syntax

default

View

Tunnel interface view

Default level

2: System level

Parameters

None

Description

	CAUTION: The default command might interrupt ongoing network services. Make sure you are fully aware of the impacts of this command when you perform it on a live network.

Use default to restore the default settings for the tunnel interface.

This command might fail to restore the default settings for some commands for reasons such as command dependencies and system restrictions. You can use the display this command in interface view to check for these commands, and perform their undo forms or follow the command reference to individually restore their default settings. If your restoration attempt still fails, follow the error message to resolve the problem.

Examples

# Restore the default settings of interface tunnel 1.

<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] default
This command will restore the default settings. Continue? [Y/N]:y