udp-helper server

Syntax

udp-helper server [ vpn-instance vpn-instance-name ] ip-address

undo udp-helper server [ [ vpn-instance vpn-instance-name ] ip-address ]

View

Interface view

Default level

2: System level

Parameters

vpn-instance vpn-instance-name: Specifies the name of a MPLS L3VPN, a case-sensitive string of 1 to 31 characters. Without this option specified, the command indicates that the destination server is in the public network.

ip-address: Specifies the IP address of the destination server, in dotted decimal notation.

Description

Use udp-helper server to specify the destination server to which UDP packets are forwarded.

Use undo udp-helper server to remove the destination server.

No destination server is configured by default.

You can configure up to 20 destination servers on an interface.

Without the ip-address argument, the undo udp-helper server command removes all the destination servers on an interface.

Related commands: display udp-helper server.

Examples

# Specify the IP address of the destination server in the public network as 192.1.1.2 on the VLAN-interface 100.

<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] udp-helper server 192.1.1.2