display arp vpn-instance

Syntax

display arp vpn-instance vpn-instance-name [ count ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

vpn-instance-name: Specifies the name of an MPLS L3VPN, a case-sensitive string of 1 to 31 characters.

count: Displays the number of ARP entries.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see the Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display arp vpn-instance to display the ARP entries for a specific VPN.

Related commands: arp static and reset arp.

Examples

# Display ARP entries for the VPN instance named test.

<Sysname> display arp vpn-instance test
                Type: S-Static    D-Dynamic
IP Address       MAC Address     VLAN ID  Interface              Aging Type
20.1.1.1         00e0-fc00-0001  N/A      N/A                    N/A   S