Enabling basic QinQ

A basic QinQ-enabled port tags an incoming packet with its PVID tag.

To enable basic QinQ:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter interface view or port group view.	Enter Layer 2 Ethernet interface view or Layer 2 aggregate interface view:interface interface-type interface-number Enter port group view:port-group manual port-group-name	Use either command.
3. Enable basic QinQ.	qinq enable	Disabled by default.

prev	up	next
Configuring basic QinQ	home	Configuring VLAN transparent transmission