display service-loopback group

Use display service-loopback group to display service loopback group information.

Syntax

display service-loopback group [ group-id ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

group-id: Specifies a service loopback group ID. The value range for the group-id argument is 1 to 1024. If you do not specify a service loopback group, this command displays information about all service loopback groups.

Examples

# Display information about service loopback group 5.

<Sysname> display service-loopback group 5

Service Group ID: 5       Service Type: Tunnel
Member:

Table 63: Command output

Field	Description
Service Group ID	Service loopback group ID.
Service Type	Service type of the service loopback group: Multicast-tunnel—Supports multicast tunnel traffic. Tunnel—Supports unicast tunnel traffic. Multiport—Supports multiport ARP traffic. VSI-gateway—Supports VSI gateway traffic.
Member	Member ports of the service loopback group.

Field

Description

Service Group ID

Service loopback group ID.

Service Type

Service type of the service loopback group:

Multicast-tunnel—Supports multicast tunnel traffic.
Tunnel—Supports unicast tunnel traffic.
Multiport—Supports multiport ARP traffic.
VSI-gateway—Supports VSI gateway traffic.

Member

Member ports of the service loopback group.

prev	up	next
Service loopback group commands	home	port service-loopback group