lldp hold-multiplier

Use lldp hold-multiplier to set the TTL multiplier.

Use undo lldp hold-multiplier to restore the default.

Syntax

lldp hold-multiplier value

undo lldp hold-multiplier

Default

The TTL multiplier is 4.

Views

System view

Predefined user roles

network-admin

Parameters

value: Sets the TTL multiplier in the range of 2 to 10.

Usage guidelines

The TTL TLV carried in an LLDPDU determines how long the device information carried in the LLDPDU can be saved on a recipient device.

By setting the TTL multiplier, you can set the TTL of locally sent LLDP frames. The TTL is expressed by using the following formula:

TTL = Min (65535, (TTL multiplier × LLDP frame transmission interval + 1))

As the expression shows, the TTL can be up to 65535 seconds.

Examples

# Set the TTL multiplier to 6.

<Sysname> system-view
[Sysname] lldp hold-multiplier 6

Related commands

lldp timer tx-interval