display lldp local-information
Use display lldp local-information to display local LLDP information.
Syntax
display lldp local-information [ global | interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
global: Displays the global local LLDP information.
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If you do not specify any keywords or arguments, the command displays all local LLDP information, which includes the following:
The global LLDP information.
The LLDP information about the LLDP-enabled ports in up state.
Examples
# Display all local LLDP information.
<Sysname> display lldp local-information Global LLDP local-information: Chassis ID : 00e0-fc00-5600 System name : Sysname System description : HPE Comware Platform Software, Software Version 7.1.070, Release 1308 HPE 5130 48G PoE+ 4SFP+ 1-slot HI Switch JH326A Copyright (c) 2010-2017 Hewlett Packard Enterprise Develo pment LP System capabilities supported : Bridge, Router, Customer Bridge, Service Bridge System capabilities enabled : Bridge, Router, Service Bridge MED information: Device class : Connectivity device MED inventory information of master board: HardwareRev : REV.A FirmwareRev : 109 SoftwareRev : 5.20 Alpha 2101 SerialNum : NONE Manufacturer name : HPE Model name : HPE 5130 48G PoE+ 4SFP+ 1-slot HI Switch JH326A Asset tracking identifier : Unknown LLDP local-information of port 52[]: Port ID type : Interface name Port ID : Port description : Interface LLDP agent nearest-bridge management address: Management address type : IPv4 Management address : 192.168.80.60 Management address interface type : IfIndex Management address interface ID : Unknown Management address OID : 0 LLDP agent nearest-nontpmr management address: Management address type : IPv4 Management address : 192.168.80.61 Management address interface type : IfIndex Management address interface ID : Unknown Management address OID : 0 LLDP agent nearest-customer management address: Management address type : IPv4 Management address : 192.168.80.62 Management address interface type : IfIndex Management address interface ID : Unknown Management address OID : 0 Port VLAN ID(PVID): 1 Management VLAN ID : 5 Link aggregation supported : Yes Link aggregation enabled : Yes Aggregation port ID : 52 Auto-negotiation supported : Yes Auto-negotiation enabled : Yes OperMau : Speed(1000)/Duplex(Full) Power port class : PSE PSE power supported : NO PSE power enabled : NO PSE pairs control ability : NO Power pairs : Signal Port power classification : Class 0 Power type : Type 2 PSE Power source : Primary Power priority : Unknown PD requested power value : 0.0 w PSE allocated power value : 0.0 w Maximum frame size : 10000 Transmit Tw : 0 us Receive Tw : 0 us Fallback Tw : 0 us Echo Transmit Tw : 0 us Echo Receive Tw : 0 us PoE PSE power source : Primary Port PSE priority : Critical Port available power value : 0.0 w
Table 57: Command output
Field | Description |
---|---|
Chassis ID | Bridge MAC address of the device. |
System capabilities supported | Supported capabilities:
|
System capabilities enabled | Enabled capabilities:
|
Device class | MED device class:
|
HardwareRev | Hardware version. |
FirmwareRev | Firmware version. |
SoftwareRev | Software version. |
SerialNum | Serial number. |
Manufacturer name | Device manufacturer. |
Model name | Device model. |
Port ID type | Port ID type:
|
Port ID | Port ID, the value of which depends on the port ID type. |
Management address interface type | Numbering type of the interface identified by the management address. |
Management address interface ID | Index of the interface identified by the management address. |
Management address OID | Management address object ID. |
Port VLAN ID(PVID) | Port VLAN ID. |
Link aggregation supported | Indicates whether link aggregation is supported on the port. |
Link aggregation enabled | Indicates whether link aggregation is enabled on the port. |
Aggregation port ID | Member port ID, which is 0 when link aggregation is disabled. |
Auto-negotiation supported | Indicates whether autonegotiation is supported on the port. |
Auto-negotiation enabled | Indicates whether autonegotiation is enabled on the port. |
OperMau | Speed and duplex state of the port. |
Power port class | PoE port class:
|
PSE power supported | Indicates whether the device can operate as a PSE. |
PSE power enabled | Indicates whether the device is operating as a PSE. |
PSE pairs control ability | Indicates whether the pair selection ability is available. |
Power pairs | Power supply mode:
|
Port power classification | Power class of the PD:
|
Power type | Power supply type:
|
Power source | Power source:
|
Power priority |
|
PD requested power value | PD requested power in watts. |
PSE allocated power value | PSE allocated power value. |
PoE PSE power source | PSE power source type:
|
PoE PD power source | PD power source type:
|
Port PSE priority | PoE power supply priority of PSE ports:
|
Port PD priority | PoE power receiving priority of PD ports:
|
Port available power value | Available PoE power on PSE ports, or power needed on PD ports, in watts. |
Transmit Tw | Sleep time of the local client, in μs. |
Receive Tw | Sleep time of the peer client expected by the local client, in μs. |
Fallback Tw | Candidate sleep time of the peer client expected by the local client, in μs. |
Echo Transmit Tw | Sleep time of the peer client, in μs. This field displays zero when one of the following cases occurs:
|
Echo Receive Tw | Sleep time of the local client expected by the peer client, in μs. This field displays zero when one of the following cases occurs:
|