display qinq
Use display qinq to display QinQ-enabled interfaces.
Syntax
display qinq [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do not specify an interface, this command displays all QinQ-enabled interfaces.
Usage guidelines
If QinQ is not enabled on any interfaces, this command does not provide any output.
Examples
# Enable QinQ on . Then, verify that QinQ is enabled on the interface.
<Sysname> system-view [Sysname] interface [Sysname-] qinq enable [Sysname-] display qinq interface Interface
# Enable QinQ on and . Then, verify that QinQ is enabled on the interfaces.
<Sysname> system-view [Sysname] interface [Sysname-] qinq enable [Sysname-] quit [Sysname] interface [Sysname-] qinq enable [Sysname-] display qinq Interface
Related commands
qinq enable