mrp timer join
Use mrp timer join to set the Join timer.
Use undo mrp timer join to restore the default.
Syntax
mrp timer join timer-value
undo mrp timer join
Default
The Join timer is 20 centiseconds.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
timer-value: Specifies the Join timer value (in centiseconds). The Join timer must meet the following requirements:
Not less than 20 centiseconds.
Less than half the Leave timer.
Divisible by 20 centiseconds.
Examples
# Set the Join timer to 40 centiseconds. (In this example, the Leave timer is 100 centiseconds.)
<Sysname> system-view [Sysname] interface [Sysname-] mrp timer join 40
Related commands
display mvrp running-status
mrp timer leave