Setting the fixed-area ratio for a queue
By default, all queues have an equal share of the fixed area. This task allows you to change the fixed-area ratio for a queue. The other queues equally share the remaining part.
The fixed-area space for a queue cannot be used by other queues. Therefore, it is also called the minimum guaranteed buffer for the queue. The sum of fixed-area ratios configured for all queues cannot exceed the total fixed-area ratio. Otherwise, the configuration fails.
To set the fixed-area ratio for a queue:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Set the fixed-area ratio for a queue. | buffer egress [ slot slot-number ] cell queue queue-id guaranteed ratio ratio | The default setting is 12%. |