Configuration procedure

# Create basic ACL 2000, and configure a rule to match packets with source IP address 2.1.1.1.

<DeviceA> system-view
[DeviceA] acl basic 2000
[DeviceA-acl-ipv4-basic-2000] rule permit source 2.1.1.1 0
[DeviceA-acl-ipv4-basic-2000] quit

# Create basic ACL 2001, and configure a rule to match packets with source IP address 2.1.1.2.

[DeviceA] acl basic 2001
[DeviceA-acl-ipv4-basic-2001] rule permit source 2.1.1.2 0
[DeviceA-acl-ipv4-basic-2001] quit

# Create a traffic class named classifier_1, and use ACL 2000 as the match criterion in the traffic class.

[DeviceA] traffic classifier classifier_1
[DeviceA-classifier-classifier_1] if-match acl 2000
[DeviceA-classifier-classifier_1] quit

# Create a traffic class named classifier_2, and use ACL 2001 as the match criterion in the traffic class.

[DeviceA] traffic classifier classifier_2
[DeviceA-classifier-classifier_2] if-match acl 2001
[DeviceA-classifier-classifier_2] quit

# Create a traffic behavior named behavior_1, and configure the action of redirecting traffic to .

[DeviceA] traffic behavior behavior_1
[DeviceA-behavior-behavior_1] redirect interface 
[DeviceA-behavior-behavior_1] quit

# Create a traffic behavior named behavior_2, and configure the action of redirecting traffic to .

[DeviceA] traffic behavior behavior_2
[DeviceA-behavior-behavior_2] redirect interface 
[DeviceA-behavior-behavior_2] quit

# Create a QoS policy named policy.

[DeviceA] qos policy policy

# Associate traffic class classifier_1 with traffic behavior behavior_1 in the QoS policy.

[DeviceA-qospolicy-policy] classifier classifier_1 behavior behavior_1

# Associate traffic class classifier_2 with traffic behavior behavior_2 in the QoS policy.

[DeviceA-qospolicy-policy] classifier classifier_2 behavior behavior_2
[DeviceA-qospolicy-policy] quit

# Apply QoS policy policy to the incoming traffic of .

[DeviceA] interface 
[DeviceA-] qos apply policy policy inbound