Configuring the rate limit for an interface
The rate limit for an interface specifies the maximum rate of incoming or outgoing packets on the interface.
Only Layer 2 Ethernet interfaces support the rate limit feature.
To configure the rate limit for an interface:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | N/A |
3. Configure the rate limit for the interface. | qos lr { inbound | outbound } cir committed-information-rate [ cbs committed-burst-size ] | By default, no rate limit is configured on an interface. |