Configuring the RIPng packet sending rate

1. Enter system view.

system-view

N/A

2. Enter RIPng view.

ripng [ process-id ]

N/A

3. Set the interval for sending RIPng packets and the maximum number of RIPng packets that can be sent at each interval.

output-delay time count count

By default, a RIPng process sends a maximum of three RIPng packets every 20 milliseconds.

4. Return to system view.

quit

N/A

5. Enter interface view.

interface interface-type interface-number

N/A

6. Set the interval for sending RIPng packets and the maximum number of RIPng packets that can be sent at each interval.

ripng output-delay time count count

By default, an interface uses the RIPng packet sending rate configured for the RIPng process that the interface runs.