Setting RIPng timers

You can adjust RIPng timers to optimize the performance of the RIPng network.

When you adjust RIPng timers, consider the network performance, and perform unified configurations on routers running RIPng to avoid unnecessary network traffic or route oscillation.

To set RIPng timers:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter RIPng view.	ripng [ process-id ]	N/A
3. Set RIPng timers.	timers { garbage-collect garbage-collect-value \| suppress suppress-value \| timeout timeout-value \| update update-value } *	By default: The update timer is 30 seconds. The timeout timer is 180 seconds. The suppress timer is 120 seconds. The garbage-collect timer is 120 seconds.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter RIPng view.

ripng [ process-id ]

N/A

3. Set RIPng timers.

timers { garbage-collect garbage-collect-value | suppress suppress-value | timeout timeout-value | update update-value } *

By default:

The update timer is 30 seconds.
The timeout timer is 180 seconds.
The suppress timer is 120 seconds.
The garbage-collect timer is 120 seconds.

prev	up	next
Tuning and optimizing the RIPng network	home	Configuring split horizon and poison reverse