Specifying a policy for local PBR
Local PBR might affect local services such as ping and Telnet. When you use local PBR, make sure you fully understand its impact on local services of the device.
You can specify only one policy for local PBR and must make sure the specified policy already exists.
Before you apply a new policy, you must first remove the current policy.
To specify a policy for local PBR:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Specify a policy for local PBR. | ip local policy-based-route policy-name | By default, local PBR is not enabled. |