Configuring actions for a node

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter policy node view.	policy-based-route policy-name [ deny \| permit ] node node-number	N/A
3. Set next hops.	apply next-hop { ip-address [ direct ] [ track track-entry-number ] }&<1-2>	By default, no next hop is specified. You can specify multiple next hops for backup in one command line or by executing this command multiple times.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter policy node view.

policy-based-route policy-name [ deny | permit ] node node-number

N/A

3. Set next hops.

apply next-hop { ip-address [ direct ] [ track track-entry-number ] }&<1-2>

By default, no next hop is specified.

You can specify multiple next hops for backup in one command line or by executing this command multiple times.

NOTE:

PBR periodically looks up the FIB table to determine the availability of a next hop specified in a PBR policy. If a next hop route change occurs, PBR might not update the route immediately. This results in a temporarily communication interruption.

prev	up	next
Setting match criteria for a node	home	Specifying a policy for PBR