Setting match criteria for a node

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter policy node view.	policy-based-route policy-name [ deny \| permit ] node node-number	N/A
3. Set an ACL match criterion.	if-match acl { acl-number \| name acl-name }	By default, no ACL match criterion is set. The ACL match criterion cannot match Layer 2 information.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter policy node view.

policy-based-route policy-name [ deny | permit ] node node-number

N/A

3. Set an ACL match criterion.

if-match acl { acl-number | name acl-name }

By default, no ACL match criterion is set.

The ACL match criterion cannot match Layer 2 information.

NOTE:

If an ACL match criterion is defined, packets are compared with the ACL rule. The permit or deny action and the time range of the specified ACL are ignored. If the specified ACL does not exist, no packet is matched.

prev	up	next
Creating a node	home	Configuring actions for a node