Configuring bidirectional control detection
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter RIP view. | rip [ process-id ] | N/A |
3. Specify a RIP neighbor. | peer ip-address | By default, RIP does not unicast updates to any peer. Because the undo peer command does not remove the neighbor relationship immediately, executing the command cannot bring down the BFD session immediately. |
4. Enter interface view. | interface interface-type interface-number | N/A |
5. Enable BFD on the RIP interface. | rip bfd enable | By default, BFD is disabled on a RIP interface. |