Configuring IPv6 RIB inter-protocol FRR
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter RIB view. | rib | N/A |
3. Create the RIB IPv6 address family and enter its view. | address-family ipv6 | By default, no RIB IPv6 address family exists. |
4. Enable IPv6 RIB inter-protocol FRR. | inter-protocol fast-reroute | By default, inter-protocol FRR is disabled. inter-protocol FRR is enabled for the public network. |