Configuring the aging time for IPv6 fast forwarding entries
The IPv6 fast forwarding table uses an aging timer for each forwarding entry. If an entry is not updated before the timer expires, the device deletes the entry. If an entry has a hit within the aging time, the aging timer restarts.
To configure the aging time for IPv6 fast forwarding entries:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Set the aging time for IPv6 fast forwarding entries. | ipv6 fast-forwarding aging-time aging-time | By default, the aging time is 30 seconds. |