Setting the maximum number of DHCPv6 snooping entries
Perform this task to prevent the system resources from being overused.
To set the maximum number of DHCPv6 snooping entries:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | N/A |
3. Set the maximum number of DHCPv6 snooping entries for the interface to learn. | ipv6 dhcp snooping max-learning-num max-number | By default, the number of DHCPv6 snooping entries for an interface to learn is not limited. |