Enabling DHCPv6 logging on the DHCPv6 server

The DHCPv6 logging feature enables the DHCPv6 server to generate DHCPv6 logs and send them to the information center. For information about the log destination and output rule configuration in the information center, see Network Management and Monitoring Configuration Guide.

As a best practice, disable this feature if the log generation affects the device performance or reduces the address and prefix allocation efficiency. For example, this situation might occur when a large number of clients frequently come online or go offline.

To configure DHCPv6 logging on the DHCPv6 server:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enable DHCPv6 logging.

ipv6 dhcp log enable

By default, DHCPv6 logging is disabled.