Assignment involving four messages

As shown in Figure 65, four-message assignment operates using the following steps:

  1. The DHCPv6 client sends a Solicit message to request an IPv6 address/prefix and other configuration parameters.

  2. The DHCPv6 server responds with an Advertise message that contains the assignable address/prefix and other configuration parameters if either of the following conditions exists:

    • The Solicit message does not contain a Rapid Commit option.

    • The DHCPv6 server does not support rapid assignment even though the Solicit message contains a Rapid Commit option.

  3. The DHCPv6 client might receive multiple Advertise messages offered by different DHCPv6 servers. It selects an offer according to the receiving sequence and server priority, and sends a Request message to the selected server for confirmation.

  4. The DHCPv6 server sends a Reply message to the client, confirming that the address/prefix and other configuration parameters are assigned to the client.

Figure 65: Assignment involving four messages