Enabling IPv6 local fragment reassembly
Use this feature on a multichassis IRF fabric to improve fragment reassembly efficiency. This feature enables the subordinate to reassemble the IPv6 fragments of a packet if all the fragments arrive at it. If this feature is disabled, all IPv6 fragments are delivered to the master for reassembly. The feature applies only to fragments destined for the same subordinate.
To enable IPv6 local fragment reassembly:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable IPv6 local fragment reassembly. | ipv6 reassemble local enable | By default, IPv6 local fragment reassembly is disabled. |