IPv6 basics configuration task list

(Required.) Assigning IPv6 addresses to interfaces:

• Configuring an IPv6 global unicast address

• Configuring an IPv6 link-local address

• Configuring an IPv6 anycast address

(Optional.) Configuring IPv6 ND:

• Configuring a static neighbor entry

• Setting the maximum number of dynamic neighbor entries

• Setting the aging timer for ND entries in stale state

• Minimizing link-local ND entries

• Setting the hop limit

• Configuring parameters for RA messages

• Setting the maximum number of attempts to send an NS message for DAD

• Configuring ND snooping

• Enabling ND proxy

(Optional.) Configuring path MTU discovery:

• Setting the interface MTU

• Setting a static path MTU for an IPv6 address

• Setting the aging time for dynamic path MTUs

(Optional.) Controlling sending ICMPv6 messages:

• Configuring the rate limit for ICMPv6 error messages

• Enabling replying to multicast echo requests

• Enabling sending ICMPv6 destination unreachable messages

• Enabling sending ICMPv6 time exceeded messages

• Enabling sending ICMPv6 redirect messages

• Specifying the source address for ICMPv6 packets

(Optional.) Enabling IPv6 local fragment reassembly