[x]

IRDP configuration example > Configuration procedure

 

 Next

Configuration procedure

  1. Configure Switch A:

    # Specify an IP address for VLAN-interface 2.

    <SwitchA> system-view
[SwitchA] interface vlan-interface 2
[SwitchA-Vlan-interface2] ip address 10.154.5.1 24

    # Enable IRDP on VLAN-interface 2.

    [SwitchA-Vlan-interface2] ip irdp

    # Specify preference 1000 for advertised IP addresses on VLAN-interface 2.

    [SwitchA-Vlan-interface2] ip irdp preference 1000

    # Specify the multicast address 224.0.0.1 as the destination IP address for RAs sent by VLAN-interface 2.

    [SwitchA-Vlan-interface2] ip irdp multicast

    # Specify the IP address 192.168.1.0 and preference 400 for VLAN-interface 2 to proxy-advertise.

    [SwitchA-Vlan-interface2] ip irdp address 192.168.1.0 400

  2. Configure Switch B:

    # Specify an IP address for VLAN-interface 2.

    <SwitchB> system-view
[SwitchB] interface vlan-interface 2
[SwitchB-Vlan-interface2] ip address 10.154.5.2 24

    # Enable IRDP on VLAN-interface 2.

    [SwitchB-Vlan-interface2] ip irdp

    # Specify preference 500 for advertised IP addresses on VLAN-interface 2.

    [SwitchB-Vlan-interface2] ip irdp preference 500

    # Specify the multicast address 224.0.0.1 as the destination IP address for RAs sent by VLAN-interface 2.

    [SwitchB-Vlan-interface2] ip irdp multicast

    # Specify the IP address 192.168.2.0 and preference 400 for VLAN-interface 2 to proxy-advertise.

    [SwitchB-Vlan-interface2] ip irdp address 192.168.2.0 400

prev

 

up

 next

Network requirements 

home

 Verifying the configuration

© Copyright 2015, 2017 Hewlett Packard Enterprise Development LP