DHCP relay agent configuration example

As shown in Figure 25, configure the DHCP relay agent on Switch A. The DHCP relay agent enables DHCP clients to obtain IP addresses and other configuration parameters from the DHCP server on another subnet.

The DHCP relay agent and server are on different subnets. Configure static or dynamic routing to make them reachable to each other.

Perform the configuration on the DHCP server to guarantee the client-server communication. For DHCP server configuration information, see "DHCP server configuration examples."

# Specify IP addresses for the interfaces. (Details not shown.)

# Enable DHCP.

<SwitchA> system-view
[SwitchA] dhcp enable

# Enable the DHCP relay agent on VLAN-interface 10.

[SwitchA] interface vlan-interface 10
[SwitchA-Vlan-interface10] dhcp select relay

# Specify the IP address of the DHCP server on the relay agent.

[SwitchA-Vlan-interface10] dhcp relay server-address 10.1.1.1

# Verify that DHCP clients can obtain IP addresses and all other network parameters from the DHCP server through the DHCP relay agent. (Details not shown.)

# Display the statistics of DHCP packets forwarded by the DHCP relay agent.

[SwitchA] display dhcp relay statistics

# Display relay entries if you have enabled relay entry recording on the DHCP relay agent.

[SwitchA] display dhcp relay client-information