Configuring address pool usage alarming
Perform this task to set the threshold for address pool usage alarming. When the threshold is exceeded, the system sends log messages to the information center. According to the log information, you can optimize the address pool configuration. For more information about the information center, see Network Management and Monitoring Configuration Guide.
To configure address pool usage alarming:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Create a DHCP address pool and enter its view. | dhcp server ip-pool pool-name | By default, no DHCP address pool exists. |
3. Set the threshold for address pool usage alarming. | ip-in-use threshold threshold-value | The default threshold is 100%. |