Short static ARP entry configuration example
Network requirements
As shown in Figure 4GigabitEthernet 1/0/2, hosts are connected to Device B. Device B is connected to Device A through interface .
To ensure secure communications between Device A and Device B, configure a short static ARP entry for Device A on Device B.
Figure 4: Network diagram
Configuration procedure
# Configure an IP address for .
<DeviceB> system-view [DeviceB] interface [DeviceB-] ip address 192.168.1.2 24 [DeviceB-] quit
# Configure a short static ARP entry that has IP address 192.168.1.1 and MAC address 00e0-fc01-001f.
[DeviceB] arp static 192.168.1.1 00e0-fc01-001f
Verifying the configuration
# Verify that Device B has a short static ARP entry for Device A
[DeviceB] display arp static Type: S-Static D-Dynamic O-Openflow R-Rule M-Multiport I-Invalid IP address MAC address VID Interface/Link ID Aging Type 192.168.1.1 00e0-fc01-001f N/A N/A N/A S