Setting the aging timer for dynamic ARP entries

Each dynamic ARP entry in the ARP table has a limited lifetime, called an aging timer. The aging timer of a dynamic ARP entry is reset each time the dynamic ARP entry is updated. A dynamic ARP entry that is not updated before its aging timer expires is deleted from the ARP table.

To set the aging timer for dynamic ARP entries:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Set the aging timer for dynamic ARP entries.	arp timer aging aging-time	The default setting is 20 minutes.

prev	up	next
Setting the maximum number of dynamic ARP entries for an interface	home	Enabling dynamic ARP entry check