display buffer usage
Use display buffer usage to display buffer usage.
Syntax
display buffer usage [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID (slot number). If you do not specify an IRF member device, this command displays buffer usage for all IRF member devices.
Examples
# Display data buffer usage.
<Sysname> display buffer usage Egress total-shared cell buffer usage on slot 1 Total: 3872 KB Used: 0 KB Free: 3872 KB 5sec 1min 5min ------------------------------------------------------------------ Block 1 0% 0% 0% GigabitEthernet1/0/1 0% 0% 0% GigabitEthernet1/0/2 0% 0% 0% GigabitEthernet1/0/3 0% 0% 0% GigabitEthernet1/0/4 0% 0% 0% GigabitEthernet1/0/5 0% 0% 0% GigabitEthernet1/0/6 0% 0% 0% GigabitEthernet1/0/7 0% 0% 0% GigabitEthernet1/0/8 0% 0% 0% GigabitEthernet1/0/9 0% 0% 0% GigabitEthernet1/0/10 0% 0% 0% GigabitEthernet1/0/11 0% 0% 0% GigabitEthernet1/0/12 0% 0% 0% GigabitEthernet1/0/13 0% 0% 0% GigabitEthernet1/0/14 0% 0% 0% GigabitEthernet1/0/15 0% 0% 0% GigabitEthernet1/0/16 0% 0% 0% GigabitEthernet1/0/17 0% 0% 0% GigabitEthernet1/0/18 0% 0% 0% GigabitEthernet1/0/19 0% 0% 0% GigabitEthernet1/0/20 0% 0% 0% GigabitEthernet1/0/21 0% 0% 0% GigabitEthernet1/0/22 0% 0% 0% GigabitEthernet1/0/23 0% 0% 0% GigabitEthernet1/0/24 0% 0% 0% GigabitEthernet1/0/25 0% 0% 0% GigabitEthernet1/0/26 0% 0% 0% GigabitEthernet1/0/27 0% 0% 0% GigabitEthernet1/0/28 0% 0% 0% GigabitEthernet1/0/29 0% 0% 0% GigabitEthernet1/0/30 0% 0% 0% GigabitEthernet1/0/31 0% 0% 0% GigabitEthernet1/0/32 0% 0% 0% GigabitEthernet1/0/33 0% 0% 0% GigabitEthernet1/0/34 0% 0% 0% GigabitEthernet1/0/35 0% 0% 0% GigabitEthernet1/0/36 0% 0% 0% GigabitEthernet1/0/37 0% 0% 0% GigabitEthernet1/0/38 0% 0% 0% GigabitEthernet1/0/39 0% 0% 0% GigabitEthernet1/0/40 0% 0% 0% GigabitEthernet1/0/41 0% 0% 0% GigabitEthernet1/0/42 0% 0% 0% GigabitEthernet1/0/43 0% 0% 0% GigabitEthernet1/0/44 0% 0% 0% GigabitEthernet1/0/45 0% 0% 0% GigabitEthernet1/0/46 0% 0% 0% GigabitEthernet1/0/47 0% 0% 0% GigabitEthernet1/0/48 0% 0% 0% Ten-GigabitEthernet1/0/49 0% 0% 0% Ten-GigabitEthernet1/0/50 0% 0% 0% Ten-GigabitEthernet1/0/51 0% 0% 0% Ten-GigabitEthernet1/0/52 0% 0% 0%
Table 44: Command output
Field | Description |
---|---|
Egress total-shared cell buffer usage on slot | Usage of the shared area of cell resources on an IRF member device. |
Total | Total size of the data buffer. |
Used | Size of used data buffer. |
Free | Size of free data buffer. |
Block 1 | Block where the port resides. The block where the ports on the front panel of the device reside is fixed to Block 1. |
5sec | Percentage of the buffer that the port uses for the last 5 seconds. |
1min | Percentage of the buffer that the port uses for the last 1 minute. |
5min | Percentage of the buffer that the port uses for the last 5 minutes. |