qos trust

Use qos trust to configure the priority trust mode for an interface.

Use undo qos trust to restore the default.

Syntax

qos trust { dot1p | dscp }

undo qos trust

Default

An interface does not trust any packet priority.

Views

Layer 2 Ethernet interface view

Predefined user roles

network-admin

Parameters

dot1p: Uses the 802.1p priority in incoming packets for priority mapping.

dscp: Uses the DSCP value in incoming packets for priority mapping.

Examples

# Set the trusted packet priority type to 802.1p priority on GigabitEthernet 1/0/1.

<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos trust dot1p

Related commands

display qos trust interface