display qos trust interface

Use display qos trust interface to display priority trust mode and port priority information on an interface.

Syntax

display qos trust interface [ interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface-type interface-number: Specifies an interface by its type and number. If you do not specify an interface, this command displays priority trust mode and port priority information of all interfaces.

Examples

# Display the priority trust mode and port priority information of GigabitEthernet 1/0/1.

<Sysname> display qos trust interface GigabitEthernet 1/0/1
Interface: GigabitEthernet1/0/1                                                       
 Port priority information                                                      
  Port priority: 0                                                              
  Port priority trust type: none

Table 28: Command output

Field	Description
Interface	Interface type and interface number.
Port priority	Port priority set for the interface.
Port priority trust type	Priority trust mode on the interface: dot1p, dscp, or none. If the trust mode is none, the port priority is used for priority mapping.

prev	up	next
Priority trust mode commands	home	qos trust