display qos policy control-plane pre-defined
Use display qos policy control-plane pre-defined to display the predefined QoS policy applied to a control plane.
Syntax
display qos policy control-plane pre-defined [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID (slot number). If you do not specify an IRF member device, this command displays predefined QoS policies applied to control planes on all IRF member devices.
Examples
# Display the predefined QoS policy applied to the control plane of IRF member device 1.
<Sysname> display qos policy control-plane pre-defined slot 1 Pre-defined policy information slot 1 Protocol Priority Bandwidth (kbps) Group IS-IS 33 512 critical ARP 8 256 normal DHCP Snooping 17 256 redirect DHCP 15 256 normal 802.1x 9 128 important STP 37 256 critical LACP 34 64 critical MVRP 11 256 critical ICMP 9 640 monitor IPOPTION 20 64 normal IPOPTIONv6 13 64 normal LLDP 25 128 important DLDP 24 64 critical TELNET 10 1280 management SSH 10 1280 management HTTP 10 64 management HTTPS 10 64 management ARP Snooping 10 256 redirect ICMPv6 1 512 monitor DHCPv6 12 256 normal
Table 22: Command output
Field | Description |
---|---|
Pre-defined policy information | Contents of the predefined control plane QoS policy. |
Protocol | System-defined control plane protocol. |
Group | Control plane protocol group. |