display qos policy

Use display qos policy to display QoS policies.

Syntax

display qos policy user-defined [ policy-name [ classifier classifier-name ] ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

user-defined: Specifies user-defined QoS policies.

policy-name: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a QoS policy, this command displays all user-defined QoS policies.

classifier classifier-name: Specifies a traffic class by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a traffic class, this command displays all traffic classes.

slot slot-number: Specifies an IRF member device by its member ID (slot number). If you do not specify an IRF member device, this command displays QoS policies on all IRF member devices.

Examples

# Display all user-defined QoS policies.

<Sysname> display qos policy user-defined

  User-defined QoS policy information:

  Policy: 1 (ID 100)
   Classifier: 1 (ID 100)
     Behavior: 1
      Marking:
        Remark dscp 3
      Committed Access Rate:
        CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)
        Green action  : pass
        Yellow action : pass
        Red action    : discard
   Classifier: 2 (ID 101)
     Behavior: 2
      Accounting enable: Packet
      Filter enable: Permit
      Marking:
        Remark dot1p 4
   Classifier: 3 (ID 102)
     Behavior: 3
      -none-