remark qos-local-id

Use remark qos-local-id to configure a local QoS ID marking action in a traffic behavior.

Use undo remark qos-local-id to delete the action.

Syntax

remark qos-local-id local-id-value

undo remark qos-local-id

Default

No local QoS ID marking action is configured.

Views

Traffic behavior view

Predefined user roles

network-admin

Parameters

local-id-value: Specifies the local QoS ID to be marked for packets. The value range for this argument is 1 to 4095. The switch supports local QoS IDs in the range of 1 to 3999.

Usage guidelines

Marking local QoS IDs combines different traffic classes into one new class, which is indicated by a local QoS ID. You can configure a traffic behavior for this new class to implement two levels of actions on a traffic class.

Marking local QoS IDs applies only to incoming traffic.

Examples

# Configure the action of marking packets with local QoS ID 2.

<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark qos-local-id 2