Specifying the role of the attached device
Make sure your setting is consistent with the type of the attached device. If you are not aware of the device type, do not specify a role for the device.
To specify the role of the attached device:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter Layer 2 Ethernet or aggregate interface view. | interface interface-type interface-number | N/A |
3. Specify the role of the device attached to the port. | ipv6 nd raguard role { host | router } | By default, the role of the device attached to the port is not specified. Make sure your setting is consistent with the device type. |