Configuration procedure
To configure ND attack detection:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter VLAN view. | vlan vlan-id | N/A |
3. Enable ND attack detection. | ipv6 nd detection enable | By default, ND attack detection is disabled. |
4. Return to system view. | quit | N/A |
5. Enter Layer 2 Ethernet or aggregate interface view. | interface interface-type interface-number | N/A |
6. (Optional.) Configure the interface as ND trusted interface. | ipv6 nd detection trust | By default, all interfaces are ND untrusted interfaces. |