Configuring the MACsec validation mode
The MACsec validation allows a port to perform integrity check based on the following validation modes:
check—Performs validation only, and does not drop illegal frames.
disabled—Does not perform validation.
strict—Performs validation, and drops illegal frames.
In the current software version, only the strict mode is supported.
To configure the MACsec validation mode:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | N/A |
3. Configure the MACsec validation mode. | macsec validation mode { check | disabled | strict } | In the current software version, only the strict mode is supported. |