Configuring ARP blackhole routing
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable ARP blackhole routing. | arp resolving-route enable | By default, ARP blackhole routing is enabled. |
3. (Optional.) Set the interval at which the device probes ARP blackhole routes. | arp resolving-route probe-interval interval | The default setting is 1 second. |
4. (Optional.) Set the number of ARP blackhole route probes for each unresolved IP address. | arp resolving-route probe-count count | The default setting is one probe. |