Configuring user lines for SSH login

Depending on the SSH application, an SSH client can be an Stelnet client, SFTP client, SCP client, or NETCONF-over-SSH client.

Only Stelnet and NETCONF-over-SSH clients require the user line configuration. The user line configuration takes effect on the clients at the next login.

To configure the user lines for Stelnet and NETCONF-over-SSH clients:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter VTY user line view.	line vty number [ ending-number ]	N/A
3. Set the login authentication mode to scheme.	authentication-mode scheme	By default, the authentication mode is password. For more information about this command, see Fundamentals Command Reference.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter VTY user line view.

line vty number [ ending-number ]

N/A

3. Set the login authentication mode to scheme.

authentication-mode scheme

By default, the authentication mode is password.

For more information about this command, see Fundamentals Command Reference.

prev	up	next
Configuring NETCONF over SSH	home	Configuring a client's host public key