Configuring automatic certificate request
![[IMPORTANT: ]](images/important.png) | IMPORTANT: The device does not support automatic certificate rollover. To avoid service interruptions, you must manually submit a certificate renewal request before the current certificate expires. | |
In auto request mode, a PKI entity automatically submits a certificate request to the CA when an application works with the PKI entity that does not have a local certificate. For example, when IKE negotiation uses a digital signature for identity authentication, but no local certificate is available, the entity automatically submits a certificate request. It saves the certificate locally after obtaining it from the CA.
A CA certificate must be present before you request a local certificate. If no CA certificate exists in the PKI domain, the PKI entity automatically obtains a CA certificate before sending a certificate request.
To configure automatic certificate request:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter PKI domain view. | pki domain domain-name | N/A |
3. Set the certificate request mode to auto. | certificate request mode auto [ password { cipher | simple } password ] | By default, the manual request mode applies. In auto request mode, set a password for certificate revocation as required by the CA policy. |