Configuration procedure
To configure the online user handshake feature:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. (Optional.) Set the handshake timer. | dot1x timer handshake-period handshake-period-value | The default is 15 seconds. |
3. Enter Layer 2 Ethernet interface view. | interface interface-type interface-number | N/A |
4. Enable the online handshake feature. | dot1x handshake | By default, the feature is enabled. |
5. (Optional.) Enable the online user handshake security feature. | dot1x handshake secure | By default, the feature is disabled. |
6. (Optional.) Enable the 802.1X online user handshake reply feature. | dot1x handshake reply enable | By default, the device does not reply to 802.1X clients' EAP-Response/Identity packets during the online handshake process. This command is available in Release 1121 and later. |